How to Paint Kitchen Cabinets


In order to paint kitchen cabinets which are made of genuine wood and have never been painted previously one should stick to the following steps for getting excellent results.

  • One should allow the cabinet door to hang and it is not essential to detach them
  • One should get rid of any handle, hooks or other hardware prior to painting a kitchen cabinet.
  • Dropcloths must be used for shielding counter tops and floor.
  • Grease should be eliminated by means of a rag and lacquer thinner.

A primer coat has to be given to the kitchen cabinet so that the entire wood surface is covered. One can use two coats if required

Now one can caulk all noticeable cracks along moldings etc. and spackle or putty any other gaps or flaws that necessitate it.

One should perform a light sanding with the help of fine grade sandpaper to every surface. One can now paint the cabinets and door&apos:s employing the appropriate tools but it is advisable to always utilize a sheen finish, such as semi-gloss or gloss. Brush should be applied in areas, and a roller should be made use of for the door faces and additional broad areas. One can utilize a dry roller to condense the stipple after the paint has settled for roughly 5 minutes.

Some Hinges can efficiently be painted over but they have to stain sealed initially. However there are other types of hinges that should be brushed around. The doors should be kept open while drying.

In order to paint kitchen cabinets which are made of genuine wood and have been previously painted one should stick to the following procedure for effectively painting it.

  • The cabinet doors should be allowed to hang and it is not obligatory to detach them
  • One should get rid off any handles, hooks or additional hardware. Dropcloths must be utilized for protecting counter tops and floors.
  • Grease should be cleaned by means of a rag and lacquer thinner.
  • Any loose paint must be carefully scraped off.

One can now caulk all noticeable fissures along moldings and spackle or putty any additional gaps or flaws that require it. The edges of paint that stays after scraping off loose paint must be properly spackled.

Light sanding can be given by employing fine quality sandpaper to every surface. One can now paint the cabinets and doors utilizing the appropriate tools but it is advisable to always make use of a sheen finish, such as semi-gloss or gloss. Brush should be used in designated areas, and roller must be utilized for the door faces and additional large areas.

One can utilize a dry roller to firm up the stipple after the paint has settled for approximately 15 minutes.