Furniture Polishing


Oil polishes, cleaners, and furniture oils give protection wood by making the exterior more smooth but they do not make available a tough defensive layer.

Products that are high in oil content should not be used for polishing since the high percentage of oil smear's the surface, revealing fingerprints. One should keep away from polishing by means of pure olive oil, which smears and draws dust.

The majority of commercial spray and liquid furniture polishes have silicone oil, which offers some fortification.

Some experts advocate restoring smudged wood furniture with a mixture of identical parts of olive oil, denatured alcohol, gum turpentine, and strained lemon juice. This should be used with a soft cloth on the desired surface and wiped with a cloth that is clean.

Normally at the time of manufacture, varnish, polyurethane, or shellac is put on to wood to shield the surface. Use of wax or polish shields the manufacturer's product and assists in diminishing surface abrasions.

Wax offers a tough finish and protection that lasts long. It does not smear, and is more hard-wearing than sprays or polishes.

One should apply paste wax or liquid wax made exclusively for furniture. Based on its application, paste wax finishes may remain for duration of a couple of years in the least.

Liquid wax is trouble free to use but a thinner layer is left and has to be applied more often than paste wax. One should have proper knowledge in using waxes to get rid streaks or a cloudy look. The application of wax should be made in light layers, and must be rubbed into the surface with the grain. One should permit it to dry and buff to a bright shine by means of a cloth that is soft.

Correct waxing procedure

  • The following steps can prove helpful in sticking to the correct waxing procedure for polishing.
  • One should insert a spoonful of wax, approximately the size of a golf ball, in a 100 per cent cotton fabric that is square in size.
  • One should cover the fabric all over the wax ball and press it till it becomes soft.
  • One small area at a time should be polished in a circular motion till the waxing is finished.
  • When the surface loses luster, the surplus wax has to be cleaned.
  • One should make use of a fresh, soft cotton cloth and move it often.

Waxing and wiping should be repeated until the whole piece is waxed. If one observes a smudge, one should continue wiping to eliminate surplus wax.

The wood can be polished by means of a cloth that is soft or with the help of lamb's-wool pad fastened to an electric drill or power buffer. If the wax spreads one can clean it by means of a cloth that is soft and carry on buffing.

For a shine that is deep, a second coat of wax has to be applied n the identical way. In order to preserve waxed furniture properly, one should dust it dust with a duster made of lamb's-wool. One should keep away from making use of liquid or aerosol furniture polishes since they can melt the wax and leaves a cloudy layer.